Edible Oils transportation bulk flexitank for non-hazardous liquids

Bulk Flexitank / flexibag/ Container Tank/ Container liner/ bulk liner

18-26KL

PICC product quality liability issued

COA certified

FDA passed

1. Capacity: 18KL-26KL

2. Structure:

Inner multilayer PE + 1 out layer PP

Spc: 4*0.125mm food grade MLDPE Films

PP Layer: 180GSM PP Fabric Woven

Spc: 2*0.125mm + 1*0.25mm food grade MLDPE Films

PP Layer: 180GSM PP Fabric Woven

Spc: 2*0.35mm food grade MLDPE Films

PP Layer: 180GSM PP Fabric Woven

3. Type:

Top loading/discharging

Bottom loading/discharging

Top loading/Bottom discharging

Accessories:

1. Valve

A) Ball valve

B) Butterfly valve

A) Ball valve is sealed more closely and with better resistance to pressure. There is no block when the valve is open, making the liquid flow in and out freely and quickly.

B) In the joint position between internal valve and flexitank, a safety protection device is added, which will prevent inner film layer blocking the valve effectively and make residual liquid the minimum after discharging.

2. Automatic airvent

The special design of airvent could automatically release air pressure inside of the flexitank. It would keep the cargo and flexitank safe during loading and transportation.

3. Fabric woven PP

One time integral molding eliminates longitudinal seams thus reducing the risks of defects or failures. Each 10cm out layer reinforcing rib means enhanced physical strength, durability and safety resulting with improved containment.

Usually, flexitanks can be applied in below areas.

(1) Food and beverage: Bulk wine, edible oil, juice concentrate, soy sauce, honey & syrup.

(2) Industrial oils such as all kinds of lubricants, industrial additives, hydralic oils and so on.

(3) Safe liquid chemicals such as glycol, latex, synthetic resin, cleaning agent, disinfectant, glycol etc.

In general, dangerous liquids and nocuous liquids can't be load in flexitanks.

FAQ

1. What type flexitank do you have?

Top Loading& Top Discharging; Bottom Loading and Bottom Discharging; Top Loading and Bottom Discharging.

3 /4 layers PE +1 layer PP+ ball/ butterfly valve

2. Do you have Insurance?

Yes, USD 5000 000 Global Quality Liability Insurance

3. What’s your brand of flexitank?

Our flexitank brand is ADA.

4. What Shipping lines accept your flexitank?

We are member of COA, have passed American Railway Impact test, almost all shipping lines accept ADA brand flexitank, such as Maersk Lines, CMA-CGM, YML, Wanhai, KMTC, Hapag-Lloyd, APL....

5. If there is leakage in abroad, how to solve it?

Except insurance, we have worldwide agent.

6. How many empty flexitank can be loaded in container?

One 20ft container can load 70 sets flexitank with accessories, one 40HQ can load 165 sets.

7. What’s your lead time?

3-7 working days.

8. How about your payment term?

T/T, L/C at sight all accept.